The best place for roller shutters

Disassembly the Moskito system

Before the mosquito-net can be disassembled, the tension band should be protected with any bar that is 2 mm in diameter, so that the spring will not unwind on its own. The bar should be placed into the opening of the tension band, combining the bracket with the bearing. The fastener can be lifted and removed with a flat screwdriver, or any other flat device. The next step is to place the hook into the tension band and remove the round reel along with the reeled mosquito-net

1. Disassembly of the Moskito system using safety plates for end caps:

moskito demontaz

2. Disassembly of the Moskito system using KWA-MKT bracket for Moskito set:

moskito demontaz 2

3. Disassembly of the Moskito system for SKT Opoterm system:

moskito demontaz 3